We
would like to introduce you to a new fabric art display system. The
Chameleon Gripper allows you to display fabric in such a way that no
hardware detracts from your piece.
There is no need to put sleeves onto quilted items and
no pins puncture your fabric art.
You simply use a piece of your border fabric along with
fusible web to cover a set of Grippers, and the Grippers virtually disappear
once your quilted piece is mounted.
Each Chameleon Gripper package comes with (2) gripper
block assemblies, photographed step by step instructions for covering
and using the Chameleon Gripper, and a free pattern for the Chameleon
Wall Hanging. The "C" block has a pre drilled hole so that
it can be mounted to your surface with a screw. We have also use the
3M brand "Command" removable adhesive strips with good results.
We are the inventor, manufacturer and distributor of the
Chameleon Gripper. In an effort to keep costs to a minimum, at this
time we have chosen to be the exclusive distributor.
Please Note: We are no longer able to ship Chameleon
Grippers to Canada, we apologize for any inconvenience.
Here's
how it works!
Each
kit is supplied with three blocks, a mounting block, a magnetic
block and the cover block. This patent-pending design yields a
great amount of support using very little wall space.
Once
the mounting block is secured to the wall,the cover block is then
covered with a piece of the same fabric that is used on the border
of your quilt.
The
magnetic block is then slid into the mounting block for each corner
of the quilt. The quilt is then stretched out at the corners to
the mounted blocks on the wall.
The
cover block is then placed over the quilt, right above the mounted
magnetic block, securely holding the quilt in place.
The
result... your quilt being proudly displayed while the mounting
system seems to disappear right into the quilt itself!
We
would like to introduce you to a new fabric art display system. The
Chameleon Gripper allows you to display fabric in such a way that no
hardware detracts from your piece. 
Each
kit is supplied with three blocks, a mounting block, a magnetic
block and the cover block. This patent-pending design yields a
great amount of support using very little wall space.
Once
the mounting block is secured to the wall,the cover block is then
covered with a piece of the same fabric that is used on the border
of your quilt.
The
magnetic block is then slid into the mounting block for each corner
of the quilt. The quilt is then stretched out at the corners to
the mounted blocks on the wall.
The
cover block is then placed over the quilt, right above the mounted
magnetic block, securely holding the quilt in place. 
The
result... your quilt being proudly displayed while the mounting
system seems to disappear right into the quilt itself!
